How to Measure Your Space for a Countertop Remnant?

Installing a remnant countertop can be one of the most functional ways to add beauty and functionality to your home. Remnants are the leftovers from larger slabs of stone materials like granite, quartz, or quartzite, which can be shorter than a standard piece of stone. Since they are smaller, they will be less expensive and will be perfect for more compact spaces such as bathroom vanities, laundry rooms, bars, or side counters.

However, before your purchase, it is crucial that you properly measure your area to use the right remnant. A remnant countertop will only work correctly if the fit is adequate for your space. This will help minimize costs if extra cutting is needed after you purchase your remnant and guarantee you can better select a suitable stone piece to begin with.This simple step-by-step guide will provide you with the knowledge to do so.

Why Accurate Measurements Are Important

Measuring your area properly is the basis of success for your countertop project. If your measurements are too small, the remnant will not be able to cover the area. If your measurements are too big, you may waste stone (increased cost) and delay installation. 

Getting accurate numbers helps the stone supplier narrow down their remnant options for your project. Instead of blindly guessing, you will be able to select from pieces that properly fit your actual site. All of this will minimize time, wasted money, and effort while allowing the installation to properly proceed.

Tools You Need Before You Start

To measure properly, you don’t need special equipment. A few simple tools are enough:

• A measuring tape

• Pencil and paper

• A straight edge or ruler

• A level (optional but useful if your walls or cabinets are uneven)

Having these tools ready before you begin will make the process easier and more accurate.

Step 1: Measure the Length of the Countertop

Start by measuring the length of the area, which will be where the countertop will be installed. Take your tape measure and put it on one end and stretch it to the other end. Write this number down carefully. If your space has more than one area, measure each one separately.

 As an example, if you are measuring a bathroom vanity, there might only be one straight area. But if you are measuring a kitchen counter that has three sections, you need to measure each section and then add them all together.

Step 2: Measure the Depth of the Countertop

The depth is the measurement from the back wall to the front edge of the counter. Most standard countertops are around 25 inches deep, but the measurement can vary. Use your tape measuring tool to measure the depth at several locations to check to see if the wall is straight. In older homes, it is common for walls to be uneven, and taking the time to double-check will save you from mistakes.

Step 3: Don’t Forget the Backsplash

You will also want to measure for a backsplash if you are planning to use one. A backsplash is typically 4 inches high, but you may want to measure for one higher or lower depending on the design. Write down the height of the backsplash you want so that the remnant can be cut accurately.

Step 4: Measure for Cutouts

If your countertop will have a sink, stove, or any appliance cutout, you must measure those too. Measure the width and length of the cutout space and note it clearly on your drawing. These details are very important, as the installer will need to cut the stone to fit around sinks or appliances.

Step 5: Make a Simple Sketch

After you measure everything, make a simple sketch of the countertop space on paper using a pencil or pen. Label the length, depth, and backsplash; be sure to label any cutouts for the sinks or appliances.There is no need for the drawing to be perfect: it just needs to be clear enough for the stone supplier to see. 

The sketch will assist them in understanding the project and allow them to recommend some of the best remnants that are part of the project.

Step 6: Double-Check Your Work

Prior to finalizing your dimensions, conduct one final measure. Double-checking minimizes the possibility of mistakes and ensures your remnant will fit correctly. You do not want to be off by an inch with stone.

Helpful Tips for Measuring

• Round up slightly: Always round up your measurements to give room for trimming.

• Use inches: Most stone suppliers prefer measurements in inches, so note everything in that unit.

• Work with a partner: If your countertop is large, ask someone to hold the tape measure for more accurate results.

• Bring your notes: Take your sketch and notes with you when shopping for remnants.

Why Choose a Countertop Remnant?

Countertop remnants are a smart option for many homeowners. Here’s why:

• Cost-effective: Since remnants are leftover pieces, they are usually priced lower than full slabs.

• Eco-friendly: Choosing remnants helps reduce waste by reusing stone that might otherwise be discarded.

• Unique designs: Even small remnants come in a variety of colors and patterns, giving you plenty of stylish options.

• Perfect for small projects: They work well for spaces like vanities, laundry rooms, bars, or side counters where you don’t need a full slab.

Final Thoughts

Measuring your area for a countertop remnant may seem overwhelming, but it is quite simple when you take things step by step. All you need is a tape measure, some paper, and a little patience to take some accurate measurements, which will help you greatly in deciding what to purchase! Once you have your measurements, you will be more confident while shopping for remnants or working with installers. 

At Kowalski Granite & Quartz, we have an unmatched selection of granite, quartz, and solid stone countertops for your home! At any time, over 200 full slabs are located in our West Michigan showroom with over 80 color variations to choose from, including granite, quartz, quartzite, and eco-friendly recycled options. Come check us out today—no appointment required!

1. What is a countertop remnant?
   A countertop remnant is a leftover piece of stone, such as granite, quartz, or quartzite, from a larger slab. They are smaller, more affordable, and ideal for compact spaces.
2. Why do I need to measure before buying a remnant??
   Accurate measurements ensure the remnant fits your space without wasting stone or adding extra cutting costs. It also helps the supplier show you only suitable pieces.
3. What tools do I need to measure my countertop space?
   A tape measure, pencil, paper, and a ruler are usually enough. A level is also helpful if your walls or cabinets are uneven.
4. How do I measure for a backsplash?
   Decide on the backsplash height (usually 4 inches) and measure along the counter length. Write the height clearly on your sketch for the supplier or installer.
5. Do I need to measure cutouts for sinks or appliances?
   Yes, measuring sink and appliance cutouts is very important. Note both the width and length so the installer can cut the stone to fit properly.
6. Should I round my measurements up or down?
   It’s best to round measurements up slightly. This gives room for trimming and ensures the remnant won’t be too small for your space.
7. Can I measure the space alone, or should I get help?
   You can measure small spaces by yourself, but for larger countertops, having a partner helps keep the tape measure straight and accurate.
8. Are remnants durable like full slabs?
   Yes, remnants are cut from the same high-quality stone as full slabs, so they are just as durable, stylish, and long-lasting.